Syncal™ N: Neutral Calcium Sulfonates with active contents ranging from 25% to 70%. These products impart demulsibility and corrosion protection to lubricating oils and protective coatings.
Syncal™ OB: Overbased Calcium Sulfonates with TBN values ranging from 300 to 400. These products provide reserve alkalinity, detergency, and dispersant characteristics to marine, PCMO, and heavy-duty diesel lubricants. In addition, several specialty products are available for conversion to overbased calcium grease, including NSF registered products.
Slide table on smaller screens
| Product | Description | Data Sheet | SDS |
|---|---|---|---|
| SYNCAL™ N45H, 45LC & N70 | View | Data Sheet | Request |
| SYNCAL™ OB320 & OB400 | View | Data Sheet | Request |
| SYNCAL™ OB405WO | View | Data Sheet | Request |
| SYNCAL™ OB407PAO | View | Data Sheet | Request |
| SYNCAL™ OB418 | View | Data Sheet | Request |
SYNCAL™ N45H, 45LC, & N70
Neutral Calcium Sulfonates
Syncal™ N45H, 45LC, and N70H are dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products impart excellent rust and corrosion inhibiting properties due to their high molecular weight and low salt content. All have characteristically low chloride contents due to the nature of the manufacturing process. Syncal™ 45LC is especially low with a maximum chloride value of 50 ppm guaranteed.
SYNCAL™ OB320 & OB400
Syncal™ OB320 and OB400 are specialty overbased calcium sulfonates that will lend detergent/dispersant, acid neutralizing, and rust and corrosion inhibiting characteristics to a variety of lubricants, greases, industrial oils, rust preventives, and metalworking fluids. Syncal™ OB320 and OB400 are excellent feedstocks for the manufacture of overbased calcium sulfonate greases and gelled coatings.
SYNCAL™ OB405WO
Syncal™ OB405WO is a high quality overbased calcium sulfonate grease feed and lubricant component in a white oil diluent. Syncal™ OB405WO is produced from a proprietary long chain alkylbenzene sulfonic acid. Syncal™ OB405WO has been specifically designed for use in incidental contact, food grade lubricant applications. Greases made with Syncal™ OB405WO will convert readily and exhibit exceptional mechanical stability, high dropping points, good load carrying performance, along with reduced wear. Greases made from Syncal™ OB405WO will impart excellent resistance to water wash-out and corrosion.
SYNCAL™ OB407PAO
Syncal™ OB407PAO is a specialty overbased calcium sulfonate that is designed for use in applications where the benefits of PAO are desired. The calcium-to-sulfonate ratio is optimized for good compatibility with other componentry. The product lends itself to a variety of applications including those where low temperature properties are needed. Syncal™ OB407PAO is a good choice for overbased calcium sulfonate grease feed. The high TBN offers good acid neutralizing and rust and corrosion inhibiting characteristics. This product can be considered as a component in a variety of lubricating oils and greases, coatings, rust preventives, metalworking fluids, and automotive lubricants.
SYNCAL™ OB418
Multifunctional Highly Overbased Calcium Sulfonate
SyncalTM OB418 is a multifunctional specialty overbased calcium sulfonate manufactured from long chain
alkylbenzene sulfonic acid. This product exhibit good oil solubility, detergency, and excellent high temperature
stability. Not only is this product a good TBN booster, it is also an excellent feedstock for manufacturing
overbased calcium sulfonate grease. Greases manufactured from SyncalTM OB418 tend to convert readily and
exhibit outstanding gel strength retention properties.